To flat tow your 2014 Jeep Wrangler Unlimited you'll need the following components:
Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-521448-5. This baseplate is designed to work with a standard factory bumper, if you have a different bumper please let me know so I can find a compatible baseplate.
Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables included so you won't have to purchase them separately and they're bracketed to the tow bar so... view full answer...
For your application the best way to mount a trailer spare to the side of your frame would be with the Dutton Lainson Offset Spare Carrier part # DL22145 which fits your 5 lug bolt pattern and your frame dimensions. view full answer...
The rear door mounted spare tire is obviously an issue for using a bike rack on a 2021 Jeep Wrangler Unlimited, especially if you have aftermarket tires. Therefore, bike rack options are limited and I don't recommend using an extender when the vehicle is flat-towed. The Yakima RidgeBack Bike Rack for 2 Bikes part # Y02457 is what I suggest. It should clear the rear spare tire no problem, it can be folded so you can open the tailgate, and it can be used on a flat-towed vehicle. I have used... view full answer...
The difference between the two part numbers is the slight difference on the fit kit portion of the feet and what vehicle's gutters they are designed to fit. For your 2021 Jeep Wrangler Unlimited the gutter foot that is recommended is the part # RRRL110S5-3 with the rest of the components being part numbers # RRVA150B-3, # RRVA-FK1-3, and # LHS-A1PAIR. view full answer...
When the Roadmaster # RM-521448-4 base plates are designed, they're designed to work with the standard factory bumper only. Due to the myriad of aftermarket bumpers available for the Jeep Wrangler JK platform, it'd be near impossible for Roadaster to test fit with all of them.
The only aftermarket bumper Roadmaster mentions that's compatible with their base plates is the Warn Elite 101420 which is compatible with the # RM42FR direct connect base plate or the # RM92FR crossbar-style base... view full answer...
The Kuat Pivot 2 Swing Away Hitch Extender # PVP20B does reduce hitch capacity by 50% so the maximum weight of capacity with the etrailer Trailer Hitch Receiver # e98856 on your Jeep is going to be 175lbs. If this was used on a receiver with a 600lb capacity the maximum weight would then be 250lbs the maximum of the Pivot and not the 50% of hitch capacity.
As you have a 2021 Jeep Wrangler Unlimited Rubicon we do have the Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR that fits models... view full answer...
Yes, we do carry the Rapid Gutter Feet for Thule Crossbars - Rain Gutters - 8" Tall - Qty 4 # TH33ZR. If you need confirmation if these feet will fit your vehicle or need a complete roof rack system with these feet, I would be happy to assist you if you provide your year/make/model of vehicle. view full answer...
The LED Light Strip Kit, # DG52694 has two 4-pin connectors with to recombine strips once cut. Any extended length of wire needed for a custom installation will need to be sourced separately from the kit itself. I suggest at least an 18 gauge solid core wire at minimum. view full answer...
To flat tow a 2017 Jeep Wrangler Unlimited Willys Wheeler edition you would need the following components:
Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-521448-5. This baseplate is only designed to fit standard factory bumpers. If you have a different bumper we'll need to know what it is to see if any baseplates are confirmed to fit with it.
Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables bracketed to the arms so you won't have to worry... view full answer...
The first thing is to ensure that the bumper you have on your 2014 Jeep Wrangler is rated for towing. Not all are so contact the bumper manufacturer and ensure that you are safe to flat tow by the bumper tabs.
The tab mounts available show they fit a 7/8" or 1" diameter hole so double check your measurement as well before ordering. These Bar Adapeters # RM-035-1 will replace the ends on the Roadmaster Falcon All Terrain Tow Bar # RM-522. These bars are designed for simple connection and... view full answer...
For your 2013 Jeep Wrangler JK Unlimited I recommend the Hidden Hitch Ball Mount # 80232. This ball mount has a length of 15-3/4"(400mm) from center of hitch pin hole to center of ball hole. That will give you an additional 3-15/16"(100mm) over your current ball mount. view full answer...
The closest possible match to what you are looking for is the Westin Platinum step pad part # 21-0001 that you referenced. It's 24 inches long like you need and has 6 posts for attaching to the step bar.
So what you'll need to do is check out the picture I attached that has all of the post dimensions of the pad to compare to yours to see if it would fit. view full answer...
We do have the chrome ring cover you need for the Optronics LED Trailer Tail Light # STL88RCB.
The correct part is the Chrome Accent Ring # A78CB. view full answer...
To wire your 2020 Jeep Wrangler Unlimited for a brake controller, and because you don't have a tow package, you are going to need the following items:
Redarc Tow-Pro Elite Trailer Brake Controller Item # RED44FR. This brake controller provide all the same functions as a typical brake controller only with a smaller foot print inside the vehicle cab.
T-One Vehicle Wiring Harness with 4-Pole Flat Item # 118786. This gives you your 4 pole wiring that will connect directly to the back of your... view full answer...
I have a great solution for you. Unfortunately the Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches # HLY94FR will not work with your 4-inch tires. However, for a platform rack that also attaches at the bikes' frames, I recommend the Hollywood Racks Bike Rack for 2 Fat Bikes # HR1450Z-FB.
the Trail Rider can hold bikes up to 5 inches wide with wheel diameters up to 60 inches. I also did some research on your SIKK cruisers, and you will not need to purchase a Swagman... view full answer...
That looks like a standard type of connector that vehicle manufacturers will use for various connections. I couldn't give you a part number for it though. Easiest option would probably be to cut that off and then use the 4-way extension part # HM47114 which is 4 feet long to get you a standard 4-way ran to front of vehicle. view full answer...
I checked out the Front Runner roof rack you have on your vehicle and since it has channels on top of if it the Rhino Rack Batwing part # RR33200 would fit on it and work well. view full answer...
The Red version of the BOLT Hi-Lift Jack Mount - Driver's Side # BL7028648 was actually discontinued back in 2017 so you either need the above mentioned black version with the black passenger's side # BL7028649 or you're going to have to get lucky finding the driver's side that hasn't already been keyed to the vehicle is you're wanting to get matching colors. view full answer...
I would be happy to help!
Starting with the 7-way connector I recommend the # ETBC7 which will plug into the 4-way connector you have on your 2007 Jeep Wrangler and will require the following additional connections:
Black wire to positive terminal of vehicle battery with included 40 amp circuit breaker
White wire grounded to frame
Blue wire to trailer brake controller
The Redarc Tow-Pro Elite # RED44FR you were looking at is an awesome choice due to it being super low profile making... view full answer...
From the sound of your question, it sounds like you are trying to figure out what you need in order to attach your 2021 Nucamp TAB 320S to your 2021 Jeep Wrangler Unlimited Rubicon with an off-road coupler. From my research, I discovered that your camper has a gross trailer weight of 2,900 pounds. As long as you have enough gross towing weight capacity on your hitch like the 4,500 pounds of the Draw-Tite Hitch - 2" # DT78MR on your Jeep, you will be safe to tow.
For the coupler itself,... view full answer...
Go To Results